NCI 7829 with standard top
NCI 7829 with ball transfer top
|NCI 7829-250 with
ball transfer top
included with cable
|Fast Digital Response Speeds
weight processing time.|
|Simple to Use
Reduces operator training time.|
overall scale deflection to less than 1/2" when a full load is
Front mounted, 1/2" H, six-digit LCD display.|
|I/O Port Allows for
connection to a computer. RS-232, bidirectional, configurable 1200
19,200 baud. Transmits weight and scale status whenever "W"
command is sent by remote device. High resolution "H"
command accesses 10 times displayed resolution.||
Stainless steel weigh platter. Painted mild steel base enclosure.|
With Auto Zero tracking for zeroing the scale. TEST Runs a
diagnostic program to assure scale is fully functional.|
power supply with standard wall plug.|
|Large 20" x 20" Weigh
Platter Easily accommodates oversize parcels.|
|RS-232 Cable Allows
you to connect to a PC.|
Capacity and Resolution:
250 lb x .05 lb or 100 kg x .02 kg
Weight classifier or scale configurations available in setup.
20" L x 20" W x 5.3" H (50.8 cm x 50.8 cm x 13.46 cm)
54 lb / 24 kg (standard configuration)
73 lb / 32 kg (with ball-top)
NIST Handbook 44 Class III, commercial applications; NTEP
#95-121, Canadian MOI approval # AM-5099
42°F to 104°F (5°C to 40°C), Class III
Device 10% to 95% RH (non-condensing)
120 VAC (+10% -15%), 60 Hz, standard 3-wire ground.
RS-232, bidirectional, configurable 1200-19.2K baud. Transmits
weight and scale status whenever ASCII "W" <CR> is sent
by a remote device.
transport of all parcels. Ideal for conveyor lines. One piece lift-off
design equipped with 25 balls.|
1/2" H, six-digit LCD display housed in a molded enclosure with a
7 ft. cable.|
|International Power Supply
230 VAC, 50 Hz power supply. End of cable terminated with a
is a registered trademark of Weigh-Tronix, Inc.